External thermal blinds

Ideatermica's external blinds can cope with any climate and temperature, allowing you to fully enjoy life in your campers or motorhomes in all seasons.

The entire product range is made of top-quality materials, specifically designed and created to guarantee excellent winter insulation, thanks to their ability to cope with very low minimum temperatures (even 20° below zero!) without any problems.

During the summertime, on the other hand, our thermal blinds prevent the sun from heating the environment excessively: both the passenger compartment and the living area of the vehicle are subject to overheating if not properly protected.

The external thermal blind is, to date, the most effective product in solving the problem of heat and cold inside vehicles.

Tailor-made for each type of cabin, with a water-repellent PVC fabric, the blackout blind is designed to insulate the top of the front  window, the side windows and the bonnet.

Tailor-made for each type of cabin, with a water-repellent PVC fabric, the blackout blind is designed to insulate the top of the front  window, the side windows and the bonnet.

• AP/BASE
  6 mm of insulation  (PVC/PVC)
• AP/LUXURY
  8 mm insulation (PVC/aluminium mesh). Tear-proof, reflective, mould-resistant, edged with 100% polyester nautical webbing.
• POWER EXTREME New
  13 mm insulation with seven layers quilted and coupled with grey nautical fabric, finisched with 100% polyester nautical webbing
• POLAR EXTREME
  13 mm insulation with 7 layers quilted and coupled inside. On the outside, the polyester camouflage fabric has a waterproof coating treatment with 100% polyester nautical webbing and waterproofed seam. No for permanent parking
• COVER SCREEN New
  Thermal blinds that protects from the sun's rays, without lagging, made of 35% polyester and 65% PVC 
• SUMMER LIGHT
  In nautical fabric, it allows total waterproofing and resists temperatures of -22°/+65°, which also allows for storage use.

Assembly is extremely easy.

The application in the upper part is possible thanks to elastic bands that are inserted in the corners of the doors and in the central part by means of a practical closing flap.

At the bottom, elastic bands have to be inserted into the corners: this will allow the two pieces to join together thanks to the Velcro positioned at both ends.

For motorhomes that do not have a passenger-side door, studs will be fitted so that it can be secured at the nearest end by means of a tie rod.